6C293 – FLY-BARR INSECT BARRIER
Through extensive research and development a revolutionary insect barrier is now available from Hydro-Gardens to be used over cooling pads*, vents and shutters. This new insect barrier has been tested in several large operations in the Middle East with excellent results in maintaining a more insect free environment. This is a long-life plastic filter, approximately 3/8″ thick, with a net backing and an average resistance to air flow of less than 0.1 W.G. static pressure at 1250 cfm or below. This is an ASHRAE tested material using a synthetic dust of 7-8 micron size at 250 fpm velocity. The arrestance is approximately 80% of the ASHRAE Synthetic Dust when the material is dry. Insects similar to and including Whitefly, cannot penetrate this barrier. This is a U.L. Class II Listed material.
With the current and planned regulations on pesticide usage,
you can’t afford to be without “FLY-BARR” INSECT BARRIER.
Easy to install: Insect Barrier can be attached to your structure using a variety of methods such as; wood lath or poly batten tape, or securing with most high quality poly locking devices. If you wish to join sections of Insect Barrier, the material can be easily overlapped and sewn together with monofilament line.
IMPORTANT: Insect Barrier should always be installed in the air flow such that the fiber filter is always forced toward the support netting!
* Do Not apply directly to cooling pads. Wetting this material will
increase static pressure and reduce air flow.
Maintenance: Washes with soap and water, or can be vacuumed.
(Note: high pressure washing is not recommended; this will loosen the bond between the fiber and the support netting.)
Quantity Pricing Available (Quantity Discounts will be applied in the cart)
Quantity Breaks – 1 / 2-5 / 6+
Shipping will be determined by each order.
The freight that shows on this shopping cart is just an estimate. Actual shipping charges will be adjusted.