Description
This is a 25lb bag of our specially formulated hobby growing food. It has the ideal balance of growing nutrients needed for various healthy plants.
CHEM-GRO OUR MOST POPULAR HOBBY FORMULA 10-8-22
GUARANTEED ANALYSIS
Total Nitrogen (N)…………………………………………………..10.00%
Available Phosphoric Acid (P205)…………………………………..8.00%
Soluble Potash (K20)……………………………………………… .22.00%
TRACE ELEMENTS
Calcium as (Ca)………………………………………………………….5.00%
Magnesium (Mg)…………………………………………………………..1.00%
Sulfur (S)………………………………………………………………….2.00%
Boron as (B)………………………………………………………………0.05%
Copper as (Cu)…………………………………………………………..0.05%
Iron (Chelated) as (Fe).. ………………………………………………0.20%
Manganese as (Mn)……………………………………………………..0.10%
Zinc (Zn)………………………………………………………………….0.05%
Molybdenum (Mo) ……………………………………………………..0.005%
Derived From:
Potassium & Calcium Nitrate, Magnesium Sulfate, Potassium & Ammonium Phosphate, Muriate of potash, Calcium Sulfate, Urea, Iron Chelate (DTPA), Iron Manganese & Zinc Sulfate, Boric Acid, Manganese Copper & Zinc Chelate & Molybdic Acid.
A COMPLETE PLANT FOOD FORMULA
Many of our commercial growers have asked if we can supply them with a hydroponic plant food they can sell to their customers that are growing in small greenhouses at home. Excellent for use on any type of plant in the hydroponic solutions or soil, indoors and outdoors. Use 1 (one) pound per 100 gallons or approximately 1 (one) teaspoon per gallon. For vegetables in hydroponics, also add Epsom Salt at a rate of 1/4 pound per 100 gallons or approximately 1/4 teaspoon per gallon.
CHEM-GRO OUR MOST POPULAR HOBBY FORMULA 10-8-22
Mix 1 teaspoon 10-8-22 & 1/4 teaspoon MgSO4 per 1 Gallon of Water
DO NOT TRY TO PRE-DISOLVE THIS IN LESS THAN A GALLON.
Mixing instructions for 100 gallons of water
(Can only be mixed into full strength working solution)
For 1 gallon, swap out the “lbs” for “tsp” below.
| Type of Fertilizer | Seedling Plants | Mature Plants |
| 10-8-22 | 8 oz. / .5 lbs. | 16 oz. / 1 lbs. |
| Magnesium Sulfate (MgSO4) | 4 oz. / .25 lbs. | 4 oz. / .25 lbs. |
| pH | Adjust to 6.2 – 6.5 | Adjust to 6.2 – 6.5 |
| Conductivity | 800 ppm + source water 1.07 mhos + source water |
1500 ppm + source water 2.00 mhos + source water |
We HIGHLY recommend that you get a tissue analysis monthly
so we can keep track of your plants uptake of fertilizers.
How To Mix Chem-Gro Fertilizers – YOU CAN NOT MAKE THIS INTO A CONCENTRATE!!
Hydro-Gardens gives Conductivity numbers in PPM x 700 scale.
For more information on EC, TDS or mS/cm conversion – See our page EC to TDS Conversion
Shipping will be determined by each order.
The freight that shows on this shopping cart is just an estimate. Actual shipping charges will be adjusted.
Recent Comments