5K101 – Sun Clear Condensation Control
1 quart will cover 10,000 sq/ft.NOTE: Certain hard waters containing excessive amounts of calcium or magnesium are not suitable for diluting Sun Clear. If this is a problem, mix with “soft” water or distilled water.
Mixing Sun Clear (for plastic, dilute 100:1; for glass 50:1)
Try the proven Sun Clear way to stop dripping in your flexible or rigid plastic or glass greenhouses, tunnels, and other plastic structures.
• Improve plant quality and yield with Sun Clear, due to less Botrytis and other plant diseases.
• As much as 50% more sunlight is transmitted through the Sun Clear treated plastic or glass.
• Years ago, when Sun Clear was first introduced to the Greenhouse market, it was received with tremendous enthusiasm.
• The only product available to do the job, Sun Clear proved effective from the arctic to the tropics in over 20 countries.
No special treatment of the surface is required. For new plastic allow the greenhouse to sweat for about 2 weeks before applying SUN CLEAR. Spray the Sun Clear mixture forcefully on the plastic. Work from the bottom up until the entire surface is thoroughly wetted and all drops disappear. If any spots are missed, they may be treated later at any time. The application of Sun Clear to the new multi-year plastics can often be improved if the dilution ration of water to Sun Clear is tried first at about 50:1. A dilution ration of 100:1 may still work with some plastics. After applying Sun Clear the surface should be allowed to dry as much as possible by opening vents, turning on fans, and temporarily turning up thermostats.
(avg. sq. ft.)
|1 PT. (0.473 L)||12.5||5,000|
|1 QT. (0.946 L)||25||10,000|
|1 GL. (3.785 L)||100||40,000|
|5 GL. (18.925 L)||500||200,000|
Shipping will be determined by each order.
The freight that shows on this shopping cart is just an estimate. Actual shipping charges will be adjusted.